If you’ve read about the revolutionary steel BONE Structure system for residential construction, you likely already know about the many advantages that it has over traditional construction, especially for housing in West Vancouver and North Vancouver:

1) Faster build time avoids the rain

2) Excellent R-factor

3) Environmentally friendly

4) Architectural advantage of greater open spans

5) Adaptable to your changing lifestyle needs

But you may be thinking that this pre-cut easy-to-assemble system will only work for large lots or for fully custom homes. The reality, however, is that BONE Structure has a complete line of homes already designed for narrower lots.

MODEL IF-1

This model is a split-level concept featuring a triple-height space with skylights above the central staircase. The master bedroom has higher ceilings, while the kitchen and dining area are in a semi-basement with a patio door that leads to the exterior sunken backyard.

 

3 bedrooms / 3 floors / 2010 sq. ft.

 

 Model IF-1
Model IF-2

 

 MODEL IF-2

This model features a triple-height void along the staircase topped by a skylight that offers natural light throughout the floors. There are two bedrooms that share a bathroom on the first floor and a master bedroom on the upper floor.

 

3 bedrooms / 3 floors / 2150 sq. ft.

 
MODEL IF-3

The standout feature of this model is a reversal of the traditional story configuration, with the bedrooms in the basement and ground floor, and the kitchen, dining room and office situated on the top floor. The first floor has a double-height master bedroom with a curtain glass wall looking out onto the street.

 

4 bedrooms / 4 floors / 2550 sq. ft.

 Model IF-3

 

The infill collection has six basic plans that can be used as a starting point to create a customized blueprint for your dream home. Starting with a pre-designed layout results in a lower design cost and quicker turnaround time for plans.

Model IF-4 MODEL IF-4

This model has an interior courtyard on the top floor inside the building, with double-height ceilings at the back of the building in the living room and dining room. The latter features a 20-foot patio door and a glass curtain wall leading out to a backyard BONE Structure pergola.

 

3 bedrooms / 2 floors / 1907 sq. ft.

 
MODEL IF-5

This model has an interior courtyard that separates the kitchen and dining room at the back from the living room at the front of the building. There is a social space with higher ceilings on the upper floor and a single-car garage with a mudroom.

 

3 bedrooms / 3 floors / 2906 sq. ft.

 

 Model IF-5
 Model IF-6 MODEL IF-6

This model’s standout feature is a cut-out into the volume at the back of the building that allows natural light to flood into the middle of the house through a double-height glass wall. The main social area is open-plan, but with different attributes that define each space and add privacy.

 

4 bedrooms / 2 floors / 2075 sq. ft.

 

Infill residential construction in Vancouver

With all the great styles and advantages that BONE structure offers for residential construction you are going to see more and more houses using this system in years to come on both large and narrow lots.

So, if you’re choosing to construct a custom home and spending your money wisely is important to you, then drop us a line at Alair Homes North Vancouver / Alair Homes West Vancouver and let us show you the future with BONE Structure.

For more information please visit Here!